Welcome to the official website of Linyi Bolito Carburetor Co., Ltd.!

Tel：+86-0539-8939611

NEWS CENTER





Location:

Homepage

News Center

Industry News

How to correctly assemble the carburetor

Categories:Industry News
Author:
Origin:
Time of issue:2021-01-12 14:07
Views:

(Summary description)A carburetor is a device that mixes a certain proportion of gasoline with air to make the engine work.It can be said that there is a carburetor wherever there is an engine,

How to correctly assemble the carburetor





How to correctly assemble the carburetor

(Summary description)A carburetor is a device that mixes a certain proportion of gasoline with air to make the engine work.It can be said that there is a carburetor wherever there is an engine,

Categories:Industry News
Author:
Origin:
Time of issue:2021-01-12 14:07
Views:

Information

　　A carburetor is a device that mixes a certain proportion of gasoline with air to make the engine work.It can be said that there is a carburetor wherever there is an engine,such as cars,motorcycles,and tricycles.Due to the importance of the carburetor,any small changes will affect the performance of the car,so the disassembly and assembly of the carburetor is very important.So how do we ensure that the carburetor is assembled correctly?

　　In the process of disassembly and assembly of the carburetor,use suitable tools and moderate force to prevent deformation of the parts.The disassembled parts should be placed neatly in order to prevent missing or wrong installation during assembly.When cleaning the disassembled parts,pay attention to the gasoline glue on the surface.The cleaned parts should be blown with compressed air.Do not wipe with cloth or paper that will produce burrs to prevent re-contamination.

　　In the process of assembling the carburetor,do not tighten the coupling screws of the float chamber,the carburetor and the engine at one time,and must be tightened several times.Generally,the tightening torque is between 12N.m and 15N.m.Otherwise,the joint surface will be deformed and air or oil leakage will occur.The tightening torque of measuring hole parts is generally between 1.5N.m and 3.0N.m.Excessive tightening torque will damage the threads,cause deformation of the parts,and even produce metal chips,which will affect the performance of the carburetor.After installing the carburetor,perform a test to see if the performance of the car is good.After the test,the installation is complete.

Scan the QR code to read on your phone

Previous: Correct use method of carburetor cleaning agent

Next: How to quickly clean motorcycle carburetor

Previous: Correct use method of carburetor cleaning agent

Next: How to quickly clean motorcycle carburetor